ARW-UV180 ultraviolet lamp is also called Wood's Spotlight, Black Light Lamp, UV Lamp and Fluorescent Leak Detection Lamp!
It is a small flashlight equipped with lithium batteries with LED cold light technology that offers a duration of approximately 50,000 hours of use. ARW-UV180 UV lamp produce a powerful concentrated and constant ultraviolet light, the on/off button is positioned behind the lamp to prevent accidental start-up and the battery is charged for about 6 hours using normal power outlets.
ARW-UV180 lamp black light spectrum is pure, a saturated UV-A component and black light filter, completely eliminate visible light, harmful light, for fluorescence detection in the field of non-destructive testing "NDT ” for material and weld flaw and crack detection, oil spot contamination detection, leak detection, and mineral exploration.


|
Technical specifications Leed Wood Lamp ARW-UV 180 |
|
|
Ultraviolet Light Source |
1 LED UV-A 365NM |
|
UVA wavelength |
290-390 nanometers (Peak 365 nanometers +/- 5nm) |
|
UVA irradiation intensity |
30,000μw/cm2 at 38cm from (15in) |
|
Irradiation area |
Ø30 mm (1.2 in), Ø70 mm (2.8 in) beam center beam at a distance of 38 cm (15 in) |
|
Dimensions |
Length: 15.9cm (6.3in) |
|
Weight |
226g (9,402 Oz) |
|
t visible (380-780 nm) |
≈10 Lux, with black filter 38cm of visible light intensity less than 10 lux |
|
Power supply |
1 X 3,350 mAh lithium battery, 3.6 volts DC |
| Duration |
3 hours (+/- 5%), 2 operating cycles with the two batteries supplied, approximately 6 hours |
| Charging time |
2 hours of 90% charge, about 8 hours full charge |
| External charger |
One 100-240V AC charger, you can charge two batteries at the same time |
|
Degree of protection |
IP 65 |
Kit Standard configuration Wood spotlight ARW-UV180
Detection of superficial and sub-surface "NDT" defects and cracks on materials and welds with the fluorescence method

Some typical applications of the ARW-UV180 ultraviolet flashlight:

