Durometer for rubber and plastic ARW-HB..

Home » Durometer for rubber and plastic ARW-HB..
The Shore Durometer ARW-HB.. is a portable and analog instrument for measuring the hardness of plastic and rubber materials. It is available in three different Shore measurement scales with a large analog dial, a hand for storing the maximum peak value and is supplied complete with wooden case and test specimen.
Durometer for rubber and plastic ARW-HB..
Product Code: 220121721
Availability: In Stock

Portable analog Shore hardness tester for rubber and plastic

  • Three versions with different measurement scales are available: Shore C/0, Shore A and Shore D
  • Equipped with a large analogue dial with a hand for storing the maximum peak value
  • Accuracy 1% of the measured value
  • Supplied complete with wooden case and test specimen
  • Reference standards: DIN 53505, ASTM D2240, ISO 868
* SELECTION OF ARTICLES:

Accessories for this product

Accessories categories for this product

Further information

Analog Shore hardness tester ARW-HB..

The Shore Durometer ARW-HB.. is an analogue and portable instrument used to precisely and quickly measure the hardness of rubber and plastic.

 

Features of the shore hardness meter:
- Shore A, C, D hardness measurement:

  • HB-A Shore A
  • HB-C Shore C
  • HB-D Shore D

- Accuracy 1% of the measured value
- Peak Hold function (max. value identification hand)

 

Measurement Mode:

Position the max pointer ndicator hand to zero (Red Pointer), then grip the instrument in the lower base, resting it on the piece to be tested and exerting a slight pressure so that the support base does not adhere completely to the surface of the object, at this point it is possible to read the instantaneous value on the main pointer and the value of max peak on the red hand.

 

Typical applications of the different shore measurement scales

  • Shore A: Rubber, elastomers, neoprene, silicone, vinyl, soft plastic, felt, leather and similar materials.
  • Shore C/0: soft materials such as foam rubber, sponge, etc.
  • Shore D: plastic, Formica, epoxy resins, plexiglass, etc.

 

Reference standards:

  • DIN 53505
  • ASTM D2240
  • ISO 868

 

 

Technical specifications Durometer ARW-HB

Measuring Range

Mod. HBA 0...100 Shore A  with resolution 1.0
Mod. HBC 0...100 Shore C/0 with resolution 1.0
Mod. HBD 0...100 Shore D with resolution 1.0

Accuracy

1% of the measured value

Dimensions

L 115 x B 60 x H 25mm

Weight

160 g

 

Downloads

© 2023 ARW Misure - Arroweld Italia S.P.A. [Via Monte Pasubio 137 - 36010 Zanè (VI) - P.IVA: 03354110243 - R.E.A.: VI/318614]